All
| Criteria | Criteria Required? |
|---|---|
| Import Permit | Yes |
| Phytosanitary Certificate | No |
| Additional Declaration/Endorsement | No |
| Protocol Market | No |
Kiln dried or Heat treated logs:
Consignments must be debarked and no more than 2% of the surface of all timber in a lot/consignment may retain bark. With no single article retaining bark on more than 5% of its surface.
Cannot be commingled with other regulated materials unless all regulated articles in the same holds or sealed container have been heat treated or kiln dried.
The Export Control Act 2020 and the Export Control (Wood and Woodchips) Rules 2021, require an export licence issued by the Department of Agriculture, Water and the Environment for any exports of two tonnes or more of:
- woodchips;
- wood in the round (i.e. logs);
- wood with a cross sectional area of at least 225 square centimetres
- the wood is sourced from an area covered by a Regional Forest Agreement (RFA). Details regarding the areas covered by RFAs can be found here: https://www.agriculture.gov.au/forestry/policies/rfa.
- the wood is sourced from a plantation.
If an export licence is required, it is the responsibility of exporters to obtain a licence to export prescribed wood or woodchips prior to export.
Exporters can find information on how to obtain an export licence for prescribed wood or woodchips on the departments website - https://www.awe.gov.au/agriculture-land/forestry/industries/export.
Any enquires on what is classed as prescribed wood or woodchips should be directed to: wood.export@awe.gov.au, or call (02) 6272 4353.
- Consignments must be heat treated or kiln dried, prior to import, in accordance with article 319.40-7(c or d) of the APHIS 7 CFR.
Either each item or bundle of timber must be marked by permanent marking or alternatively, the consignment is accompanied by an exporters declaration attesting to treatment.
Temperate Hardwood logs with or without bark:
- Consignments must be fumigated, prior to import, in accordance with article 319.40-7(f)(1)(i), T312 or (ii), T404 of the APHIS 7 CFR.
10/11/2021 - Updated general requirements due to legislation changes.