Wheat

Country
Tanzania, United Republic of (TZ)
Scientific Name
Triticum spp.
Group
Grains / Seeds
End use
Processing
NPPO Details
Ministry of Agriculture
Relevant Web Addresses
https://www.kilimo.go.tz/index.php/en
Criteria Criteria Required?
Import Permit Yes
Phytosanitary Certificate Yes
Additional Declaration/Endorsement Refer below
Protocol Market No
Consignments are to be free from pests, soil, weed seeds and extraneous material.


A copy of the import permit must be presented to an Authorised Officer at the time of inspection.


Consignments should not contain more than 0.5% weed seeds (when specified on the import permit).

Non-GMO requirements:

If certification is required (refer to import permit/NPPO notification), the exporter is responsible for ensuring that the consignment is accompanied by a Certificate as to Condition attesting that the seed has not been genetically modified.

If requested, a Certificate as to Condition (Grain - GX46/Horticulture - HX46) can be issued for the consignment that is specifically supported from information supplied by the Office of the Gene Technology Regulator (OGTR) and where it is a government requirement of the importing country for non-GMO certification (refer to import permit/NPPO Notification).

The following text must be added to the additional declaration field when a GX46/HX46 template is added to the RFP:

The Office of the Gene Technology Regulator has advised the department that there has been no intentional release into the Australian environment of genetically modified product(s) listed on this certificate.

Explanation of Endorsement 6545:

Inspection by an Authorised Officer is sufficient for endorsing freedom from Common ragweed (Ambrosia artemisiifolia), Spear thistle (Cirsium vulgare), Canadian fleabane (Conyza canadensis) and Bugweed (Solanum mauritianum).
Consignments are to be fumigated with an appropriate fumigant at recommended manufacturers' requirements.

The exporter is to provide evidence attesting to the treatment and present it to the Authorised Officer at the time of inspection.

The Authorised Officer is to validate the fumigation/treatment certificate when the import permit requires fumigation to be undertaken before export. 

Details of treatment to be endorsed on the phytosanitary certificate in the treatment section.

No fumigation/treatment certificate is required when the import permit does not require mandatory pre-export or in-transit fumigation. A phytosanitary certificate without treatment details will be issued in such cases.

In-transit fumigation:

In-transit phosphine fumigation details may be endorsed on the phytosanitary certificate in the treatment section as follows:

“THE ALUMINIUM PHOSPHIDE FUMIGATION OF [commodity] ONBOARD [enter vessel name] WAS CONDUCTED IN-TRANSIT BY A LICENSED FUMIGATOR AT [dosage] GRM/M3 FOR [number of days] DAYS [OR MORE] AT [temperature] DEGREES CELSIUS."

The date to be entered into the Start and End Date fields in the Treatment section of EXDOC (same date into both fields) is the date the tablets/pellets/sleeves are placed into the vessel holds.

The exporter is to provide evidence attesting to the treatment and present it to the department at time of authorisation.

Details of treatment to be endorsed on the phytosanitary certificate in the treatment section.

For treatment, which is not undertaken onshore, prior to departure, the licensed fumigator/exporter is to provide the Grain and Seed Export Program Grain.Export@aff.gov.au with:

  • permit issued by the APVMA allowing use of fumigant in-transit
  • fumigation plan including:
    • re-circulation method and monitoring lines and their locations
    • method of sealing holds during fumigation
    • method of clearing the fumigant from the consignment
    • method used to provide gas free certification
    • proposed dosage (grm/m3), temperature (degrees Celsius), and duration of treatment (days) in accordance with NPPO import conditions
    • vessel name, destination and holds loaded
    • commodity and quantity
    • signed and dated by the treatment provider or a management representative
A treatment certificate from the licensed fumigator containing the following information must be provided to the department at the time of requesting authorisation:
  • proposed dosage (grm/m3), temperature (degrees Celsius), and duration of treatment (days) in accordance with NPPO import conditions
  • vessel name, destination and holds loaded
  • commodity and quantity
  • signed by a licensed fumigator with contact details provided.
Note:
  • In-transit phosphine fumigation may only be undertaken when approved by the destination country.
  • If treatment is to be undertaken in-transit, consignment must be found free of live insects during phytosanitary inspection.
  • Fumigator must submit the Fumigation Plan to the Grain and Seed Export Program (Grain.Export@aff.gov.au) for approval before undertaking in-transit phosphine fumigation to meet importing country's quarantine requirement.

The exporter is to provide evidence attesting to the treatment and present it to the department at time of authorisation.
Option 1 (EXDOC Endorsement 6545)
1) A representative sample was inspected and found to be free of Common ragweed (Ambrosia artemisiifolia), Spear thistle (Cirsium vulgare), Canadian fleabane (Conyza canadensis) and Bugweed (Solanum mauritianum).
Import permit dated 19 January 2021.
06/12/2022 - Update to non-GMO requirements
10/03/2022 - Updated in-transit phosphine requirements.
28/02/2022 - Update to general requirements - removed reference to GX46 for non-GMO certification.
01/12/2021 - Amended the general and treatment sections to explain the endorsement of in-transit phosphine fumigation.
31/08/2021 - Added in-transit fumigation details.
25/01/2021 - Update to endorsement - new endorsement created as per NPPO requirements.
Initial Uploaded: 29/07/2014
Reviewed Uploaded: 18/07/2026