Stockfeed - multiple ingredients (dedicated mills)

Country
New Zealand (NZ)
End use
Stockfeed
NPPO Details
Ministry for Primary Industries (MPI)
Criteria Criteria Required?
Import Permit Yes
Phytosanitary Certificate Yes
Additional Declaration/Endorsement Yes
Protocol Market No
Consignments are to be free from pests, soil, weed seeds and extraneous material.


A copy of the import permit must be presented to an Authorised Officer at the time of inspection.


Where applicable, the exporter is to provide evidence attesting to the endorsement and present it to the Authorised Officer at the time of inspection.


This Micor case applies to products being exported under the Import Health Standard: Processed Animal Feed of Plant Origin section 7.5. Refer to the import permit to confirm section 7.5 is referenced.

Product may be imported in either clean, new bags or loose in bulk.

The import requirements in this restriction apply to the following:
  • Plant based multiple ingredient stock feeds and additives may contain either ground or hammer-milled grains and plant products that have been produced by the whole mixture passing through a high heat extrusion, expanding or pelleting process incorporating steam and pressure.
  • The feeds may be a loose mix of grains and other plant material in the form of blended mash, or muesli style in which the individual ingredients or the ingredients together have been cooked or heated (e.g. roasted, micronised, steamed and rolled or irradiated).
  • The feeds may contain finely chopped hay or roughage included before the heating process.
  • Cubed products containing predominantly hay or only hay will be assessed on application to ensure that the total processing method(s) will devitalise seeds. High temperature and pressure is usually required. Specific conditions will be listed on the permit
  • Plant based feeds may contain animal ingredients (e.g. dairy products, fish meal) in accordance with the relevant animal standards, which will be stipulated on the permit.
Importation/certification requirements are:

Import permit: Required 

Phytosanitary certificate: Required

Manufacturer's certificate: Required - see the MPI Standard for specific details that the exporter must comply with.

Fumigation certificate: Required only for loose bulk stock feeds (not bagged) - see treatment text for details

For product shipped bulk in ships' holds or in containers:

  • been inspected after processing in accordance with appropriate official procedures, and found free from contamination by any unprocessed plant material, vermin, birds, faecal material and other animal products and visually detectable regulated pests.

AND

  • been stored in substantially bird-proof buildings or bird-proof storage houses, and transported to the exit port prior to loading, in a manner to prevent contamination with any unprocessed plant material, vermin, birds, ruminant animals, faecal material and other animal products.

OR

For product shipped in bags:

  • been bagged in clean new bags immediately after processing and the bags stored in a manner to prevent infestation and contamination.

Explanation of the endorsements

The import permit and MPI Standard will state the required additional declaration for the consignment which may include one or more of the following:

Endorsement 899 and 4852:

Will apply for bulk loaded `loose' product.

Endorsement 910, 5182 and 5188:

Will apply for bagged `loose' product.

Endorsement 2119:

Will apply for bagged pelleted/extruded product.

Endorsement 2518:

Will apply for bulk loaded pelleted/extruded product.
Fumigation treatment:

All loose, bulk stock feed consignments and all meal products (except for those bagged products listed below) must be fumigated prior to or during shipment to ensure that subsequent infestation from holds, containers or other chance pest presence does not occur.

Fumigation must be with phosphine or methyl bromide at the following prescribed rates. The fumigation certificate must state the fumigant used and the rate used. Fumigation given prior to shipment must be carried out no more than 21 days prior to shipment.

Phosphine: (prior to shipment or in transit):

Fumigation can be carried out prior to shipment or may be carried out with phosphine generating products e.g. tablets, pellets, sachets or blankets introduced with the product into the sealed container or ships' hold to be effective during the journey (the ships' master must be notified).

The table below gives the rates to be used when using phosphine generating products. Three days must be added if the fumigant is surface applied in trays. One day less may be subtracted for cylinderised phosphine gas application completed prior to shipment. The fumigation certificate must state the method of application and clearly state whether the consignment was exposed to the fumigant before the voyage with the fumigant removed, or whether the application was with tablets, pellets, sachets or blankets introduced with the product into the sealed container or ships' hold to remain there for the journey.

Phosphine application is based on the internal volume of the enclosure.

  • 13 days at 1grm/m3 at 15-20 degrees Celsius;

OR

  • 10 days at 1grm/m3 at 20-25 degrees Celsius;

OR

  • 6 days at 1grm/m3 at 25-29 degrees Celsius;

OR

  • 5 days at 1grm/m3 at 30+ degrees Celsius;

OR

  • 12 days at 2grm/m3 at 15-20 degrees Celsius;

OR

  • 9 days at 2grm/m3 at 20-25 degrees Celsius;

OR

  • 5 days at 2grm/m3 at 25-29 degrees Celsius;

OR

  • 4 days at 2grm/m3 at 30+ degrees Celsius.
In-transit insecticide treatment:

Only permitted if import permit grants equivalence to fumigation requirements. 

Consignments must be accompanied by a treatment certificate declaring that:

  • All vents and door seals have been sprayed with a residual insecticide after loading,

AND

  • An insecticide product has been set for discharge during shipment of this product to New Zealand.

Details of treatment are not to be certified on the phytosanitary certificate.

Please refer to the import permit for details of the manufacturer's certificate and fumigation treatment.

In-transit fumigation:

In-transit phosphine fumigation details may be endorsed on the phytosanitary certificate in the treatment section as follows:

“THE ALUMINIUM PHOSPHIDE FUMIGATION OF [commodity] ONBOARD [enter vessel name] WAS CONDUCTED IN-TRANSIT BY A LICENSED FUMIGATOR AT [dosage] GRM/M3 FOR [number of days] DAYS [OR MORE] AT [temperature] DEGREES CELSIUS."

The date to be entered into the Start and End Date fields in the Treatment section of EXDOC (same date into both fields) is the date the tablets/pellets/sleeves are placed into the vessel holds.

The exporter is to provide evidence attesting to the treatment and present it to the department at time of authorisation.

Details of treatment to be endorsed on the phytosanitary certificate in the treatment section.

For treatment, which is not undertaken onshore, prior to departure, the licensed fumigator/exporter is to provide the Grain and Seed Export Program Grain.Export@aff.gov.au with:

  • permit issued by the APVMA allowing use of fumigant in-transit
  • fumigation plan including:
    • re-circulation method and monitoring lines and their locations
    • method of sealing holds during fumigation
    • method of clearing the fumigant from the consignment
    • method used to provide gas free certification
    • proposed dosage (grm/m3), temperature (degrees Celsius), and duration of treatment (days) in accordance with NPPO import conditions
    • vessel name, destination and holds loaded
    • commodity and quantity
    • signed and dated by the treatment provider or a management representative
A treatment certificate from the licensed fumigator containing the following information must be provided to the department at the time of requesting authorisation:
  • proposed dosage (grm/m3), temperature (degrees Celsius), and duration of treatment (days) in accordance with NPPO import conditions
  • vessel name, destination and holds loaded
  • commodity and quantity
  • signed by a licensed fumigator with contact details provided.
Note:
  • In-transit phosphine fumigation may only be undertaken when approved by the destination country.
  • If treatment is to be undertaken in-transit, consignment must be found free of live insects during phytosanitary inspection.
  • Fumigator must submit the Fumigation Plan to the Grain and Seed Export Program (Grain.Export@aff.gov.au) for approval before undertaking in-transit phosphine fumigation to meet importing country's quarantine requirement.


The exporter is to provide evidence attesting to the treatment and present it to the department at time of authorisation.

Note:
  • Treatment may be undertaken onshore or in-transit.
  • Consignments found to be free of live insects during phytosanitary inspection may be fumigated in-transit.
  • On the detection of live injurious insects during phytosanitary inspection, consignments must be fumigated before re-presenting for inspection to the Authorised Officer. In-transit fumigation is not allowed under this situation.

Methyl bromide (prior to shipment) - One of the following rates (at atmospheric pressure) must be used:

  • 48grm/m3 for 24 hours at 10-15 degrees Celsius;

OR

  • 40grm/m3 for 24 hours at 16-20 degrees Celsius;

OR

  • 32grm/m3 for 24 hours at 21+ degrees Celsius.
Note:
  • Meal products in bags only may be given an increased inspection on arrival in lieu of fumigation.

If treatment is undertaken onshore the Exporter is to provide evidence attesting to the treatment and present to the Authorised Officer at the time of inspection.

Details of treatment to be endorsed on the phytosanitary certificate in the treatment section.

Option 1 (EXDOC Endorsement 899)
1) The products in this consignment were produced in a dedicated mill whichdoes not produce rations containing ruminant protein (except dairy product),
2) The products in this consignment do not contain any ingredients which wereprocessed in premises where ruminant protein (except dairy product) is stored,used or processed,
3) Each ingredient of the product in this consignment has undergone aheating/cooking process that has raised the core temperature to at least 85degrees Celsius for a minimum 30 seconds,
4) A representative sample of the product in this consignment has beeninspected and contains no viable seeds,
5) A representative sample of this consignment has been inspected afterprocessing in accordance with appropriate official procedures, and found freefrom contamination by any unprocessed plant material, vermin, birds, faecalmaterial and visually detectable regulated pests,
6) The product in this consignment has been stored in substantially bird-proofbuildings or bird-proof storage houses, and transported to the exit port priorto loading, in a manner to prevent contamination with any unprocessed plantmaterial, vermin, birds, faecal material and visually detectable regulatedpests.


Option 2 (EXDOC Endorsement 910)
1) The products in this consignment were produced in a dedicated mill which does not produce rations containing ruminant protein (except dairy product),
2) The products in this consignment do not contain any ingredients which were processed in premises where ruminant protein (except dairy product) is stored, used or processed,
3) Each ingredient of the product in this consignment has undergone a heating/cooking process that has raised the core temperature to at least 85 degrees Celsius for a minimum 30 seconds,
4) A representative sample of the product in this consignment has been inspected and contains no viable seeds,
5) The product in this consignment has been bagged in clean new bags immediately after processing and the bags stored in a manner to prevent infestation and contamination.

Option 3 (EXDOC Endorsement 4852)
1) The products in this consignment were produced in a dedicated mill which does not produce rations containing ruminant protein (except dairy product),
2) The products in this consignment do not contain any ingredients which were processed in premises where ruminant protein (except dairy product) is stored, used or processed,
3) Each ingredient of the product in this consignment has been irradiated at a dose of 25 kGy,
4) A representative sample of the product in this consignment has been inspected and contains no viable seeds,
5) A representative sample of this consignment has been inspected after processing in accordance with appropriate official procedures, and found free from contamination by any unprocessed plant material, vermin, birds, faecal material and other animal products and visually detectable regulated pests,
6) The product in this consignment has been stored in substantially bird-proof buildings or bird-proof storage houses, and transported to the exit port prior to loading, in a manner to prevent contamination with any unprocessed plant material, vermin, birds, ruminant animals, faecal material and other animal products.

Option 4 (EXDOC Endorsement 5182)
1) The products in this consignment were produced in a dedicated mill which does not produce rations containing ruminant protein (except dairy product),
2) The products in this consignment do not contain any ingredients which were processed in premises where ruminant protein (except dairy product) is stored, used or processed,
3) Each ingredient of the product in this consignment has been irradiated at a dose of 25 kGy,
4) A representative sample of the product in this consignment has been inspected and contains no viable seeds,
5) The product in this consignment has been bagged in clean new bags immediately after processing and the bags stored in a manner to prevent infestation and contamination.

Option 5 (EXDOC Endorsement 5188)
1) The products in this consignment were produced in a dedicated mill which does not produce rations containing ruminant protein (except dairy product),
2) The products in this consignment do not contain any ingredients which were processed in premises where ruminant protein (except dairy product) is stored, used or processed,
3) Each ingredient of the product in the consignment has undergone a heating/cooking process that has raised the core temperature to at least 85 degrees Celsius for a minimum of 30 seconds or been irradiated at a dose of 25 kGy,
4) A representative sample of the product in this consignment has been inspected and contains no viable seeds,
5) The product in this consignment has been bagged in clean new bags immediately after processing and the bags stored in a manner to prevent infestation and contamination.

Option 6 (EXDOCEndorsement 2119)
1) The products inthis consignment were produced in a dedicated mill which does not producerations containing ruminant protein (except dairy product),
2) The products inthis consignment do not contain any ingredients which were processed inpremises where ruminant protein (except dairy product) is stored, used orprocessed,
3) The product inthis consignment have been through a pelleting or extruding process that hasraised the core temperature of the product to at least 85 degrees Celsius for a minimum 30seconds,
4) A representativesample of the product in this consignment has been inspected and contains noviable seeds,
5) The product inthis consignment has been bagged in clean new bags immediately after processingand the bags stored in a manner to prevent infestation and contamination.

Option 7 (EXDOC Endorsement 2518)
1) The products in this consignment were produced in a dedicated mill which does not produce rations containing ruminant protein (except dairy product),
2) The products in this consignment do not contain any ingredients which were processed in premises where ruminant protein (except dairy product) is stored, used or processed,
3) The products in this consignment have been through a pelleting or extruding process that has raised the core temperature of the product to at least 85 degrees Celsius for a minimum of 30 seconds,
4) A representative sample of the product in this consignment has been inspected and found free of viable seeds,
5) A representative sample of this consignment has been inspected after processing in accordance with appropriate official procedures, and found free from contamination by any unprocessed plant material, vermin, birds, faecal material and visually detectable regulated pests,
6) The product in this consignment has been stored in substantially bird-proof buildings or bird-proof storage houses, and transported to the exit port prior to loading, in a manner to prevent contamination with any unprocessed plant material, vermin, birds, faecal material and visually detectable regulated pests.
Import Permit dated 15 August 2016 and MPI HIS dated February 2017. MPI Import Health Standard dated 19 December 2022 cited 18 December 2024.
06/01/2025 - Existing endorsement 5188 added. Explanation of endorsement 5188 text updated.
19/12/2024 - Removed text for endorsements 800, 2944, 4859, 772, 792, 798, 2671, 664, and 5188. Explanation of endorsements 899, 4852, 910, 5182, 2119 and 2518 text updated.
01/11/2022 - Update to general requirements to state this Micor case only applies to products under 7.5 of the NZ IHS.
10/03/2022 - Updated in-transit phosphine requirements.
31/08/2021 - Added in-transit fumigation details.
Initial Uploaded: 29/07/2014
Reviewed Uploaded: 18/07/2026