Foxtail / Italian millet
| Criteria | Criteria Required? |
|---|---|
| Import Permit | No |
| Phytosanitary Certificate | Yes |
| Additional Declaration/Endorsement | Refer below |
| Protocol Market | No |
The consignment must meet all requirements of Grain and Seeds for Consumption, Feed or Processing IHS (both Part 1 and the applicable section of Part 2), including the requirement to be free of unidentified viable seeds which are:
- not listed in the PBI
- listed as "entry prohibited" in the PBI
- listed in the PBI and present in volumes greater than 0.1% in weight of the consignment
- listed in the Schedule of Regulated (Quarantine) Weed Seeds.
Grain/seeds devitalised in Australia:
- Applies to viable grain / seed for treatment to render them non-viable in Australia.
- Setaria italica grain must be rendered non-viable prior to arrival in New Zealand, using one of the treatment options listed in Appendix 2 of the IHS.
- Following treatment, grain must be securely held to prevent contamination or re-infestation with regulated pests.
- Additional Declaration 793 or 1304 is required.
Grain/seeds to be treated in New Zealand:
- Applies to viable grain / seed for treatment to render them non-viable at a transitional facility.
- For grains that are to be treated on arrival, the importer should, prior to import, ensure that the transitional facility can treat the consignment.
- No Additional Declaration is required.
- A Sampling Certificate (Additional Statement 8191) and a Seed Analysis Certificate are required. Otherwise, the grain will be analysed upon arrival in New Zealand.
- The Seed Analysis Certificate must be issued by an Association of Official Seed Analysts (AOSA) or ISTA accredited seed testing station or an Australian laboratory capable of undertaking the analysis.
- Additional Declaration 930 is required.
- Applies to non-viable grain that has been devitalised in Australia by irradiation.
- Grains/seeds must be irradiated as per the Treatment section.
- Applies to non-viable grain that has been devitalised in Australia by heat treatment.
- Grains/seeds must be heat treated as per the Treatment section.
- Applies to grain for biosecurity clearance on arrival at the New Zealand border (IHS section 2.21.4).
- A Sampling Certificate (Additional Statement 8191) and a Seed Analysis Certificate are required, otherwise the grain will be analysed upon arrival in New Zealand.
- The Seed Analysis Certificate must be issued by an Association of Official Seed Analysts (AOSA) or ISTA accredited seed testing station or an Australian laboratory capable of undertaking the analysis.
- 85 degrees Celsius for 15 hours at a minimum of 40% relative humidity.
The exporter is to provide evidence attesting to the treatment and present it to the Authorised Officer at the time of inspection.
Details of treatment to be endorsed on the phytosanitary certificate in the treatment section.
1) The grain/seed in this consignment has been heat treated and the consignment contains no viable seeds.
Option 2 (EXDOC Endorsement 793)
1) The grain/seed in this consignment has been irradiated at 25 kGy and the consignment contains no viable seeds.
1) Downy mildew of millet (Sclerospora graminicola) is not known to occur in Australia.
Option 1 (Additional Statement 8191)
Import Health Standard dated 4 February 2022 and 11 June 2024, updated IHS sighted 9 January 2025.
14/10/2024 - Amended endorsement 930 to be 7913.
26/07/2022 - Amended case based on revised Import Health Standards