Barley
| Criteria | Criteria Required? |
|---|---|
| Import Permit | Refer below |
| Phytosanitary Certificate | Yes |
| Additional Declaration/Endorsement | Yes |
| Protocol Market | No |
Explanation of the endorsements:
Endorsement 1304:
- Applies to non-viable grain that has been devitalised in Australia by heat treatment (IHS section 2.10.1).
- No import permit is required.
- Grains/seeds must be heat treated as per the Treatment section.
- No Additional Statement is required.
- Applies to non-viable grain that has been devitalised in Australia by irradiation (IHS section 2.10.1).
- No import permit is required.
- Grains/seeds must be heat treated as per the Treatment section.
- No Additional Statement is required.
Importation of viable grain/seeds for processing in New Zealand MPI approved transitional facilities (applies to endorsements 1100 and 4996)
- Applies to viable grain / seed for processing at MPI approved transitional facilities (IHS section 2.10.3)
- A copy of the import permit must be presented to an Authorised Officer at the time of inspection.
- A Sampling Certificate (Additional Statement 8191 or 8192) and Seed Analysis Certificate is required. Otherwise, the grain will be analysed upon arrival in New Zealand.
- The Seed Analysis Certificate must be issued by an Association of Official Seed Analysts (AOSA) or ISTA accredited seed testing station, or an Australian laboratory capable of undertaking the analysis.
- Consignments must meet the requirements listed in the section above titled Importation of viable grain/seeds for processing in New Zealand MPI approved transitional facilities.
- A Laboratory Analysis Certificate for Fusarium head blight must be presented at the time of inspection.
- A Sampler's Certificate, Laboratory Analysis Certificate or Exporter's Declaration must be presented as evidence that the Diplodia leaf spot testing sample was drawn size of five times ISTA or AOSA guidelines/methodologies.
- The sample rate required for the Fusarium head blight testing is different to the sample rate required for the seed analysis.
- Consignments must meet the requirements listed in the section above titled Importation of viable grain/seeds for processing in New Zealand MPI approved transitional facilities.
- An Area Freedom Certificate for Fusarium head blight must be presented at the time of inspection.
- Applies to viable grain / seed for heat treatment upon arrival in New Zealand (IHS section 2.10.2).
- No import permit is required.
- Treatments must be carried out in a MPI approved transitional facility.
If endorsements 1304 is applied, then the consignment must be heat treated at:
- 121 degrees Celsius for 15 minutes
- 100 degrees Celsius for 30 minutes
- 85 degrees Celsius for 15 hours at a minimum 40% relative humidity.
If endorsement 793 is applied, then the consignment must be irradiated at a dose of 25 kGy.
The exporter is to provide evidence attesting to the treatment and present it to the Authorised Officer at the time of inspection.
No treatment details are to be endorsed on the Treatment section of the phytosanitary certificate.
1) The grain/seed in this consignment has been irradiated at 25 kGy and the consignment contains no viable seeds.
Option 2 (EXDOC Endorsement 1304)
1) The grain/seed in this consignment has been heat treated and the consignment contains no viable seeds.
Option 3 (EXDOC Endorsement 1100)
1) Cephalosporium stripe: cereals (Cephalosporium gramineum) and Dwarf bunt (Tilletia controversa) are known not to occur in Australia,
2) The consignment was representatively sampled with a sample size of five times (5x) ISTA or AOSA guidelines/methodologies and tested in an NPPO approved diagnostic laboratory and found free from Fusarium head blight (Fusarium longipes),
3) A representative sample has been inspected in accordance with appropriate official procedures and found to be free of any live, visually detectable regulated insects and mites.
Option 4 (EXDOC Endorsement 4996)
1) Cephalosporium stripe: cereals (Cephalosporium gramineum) and Dwarf bunt (Tilletia controversa) are known not to occur in Australia,
2) The seed has been sourced from a pest free area, free from Fusarium head blight (Fusarium longipes),
3) A representative sample has been inspected in accordance with appropriate official procedures and found to be free of any live, visually detectable regulated insects and mites.
Option 1 (Additional Statement 8190)
Declaration for vessel hold cleanliness (grain and seed)
1) A primary sample was officially drawn during the loading of the consignment, at a rate of at least one primary sample per 100 tonnes of grain.
2) All submitted samples were prepared and dispatched in accordance with ISTA rules.
Declaration for seed sampling and vessel hold cleanliness (grain and seed)
1) The holds carrying the loose grain have been inspected prior to loading and found to be free of animal material, regulated mobile arthropods, regulated weed seeds, and residues of previous cargo
2) A primary sample was officially drawn during the loading of the consignment, at a rate of at least one primary sample per 100 tonnes of grain.
3) All submitted samples were prepared and dispatched in accordance with ISTA rules.
17/09/2025 - Amended text and explanation of additional statements 8190 & 8192.
20/07/2022 - Amended case based on NPPO requirements