Thuja plicata
| Criteria | Criteria Required? |
|---|---|
| Import Permit | Yes |
| Phytosanitary Certificate | Yes |
| Additional Declaration/Endorsement | No |
| Protocol Market | No |
A copy of the import permit must be presented to an Authorised Officer at the time of inspection.
All sawn timber must be debarked with a tolerance or allowance of up to 5%.
It is the exporter’s responsibility to ensure that the phytosanitary certificate is issued within 14 days of the consignment being exported from Australia.
Refer to the departure date and inspection date in the Request for Permit.
All timber must be debarked before export to Malaysia.
For heat treatment core temperature of timber must be maintained at or above 56 degrees Celsius for a minimum of 30 minutes.
Treatment time does not commence until the temperature in the chamber has stabilized and the core temperature of the timber has reached a minimum of 56 degrees Celsius;OR
All the sawn timber must undergo fumigation with one of the following:
Methyl bromide at:
- 21 degrees Celsius or above at 48 grm/m3 for 24 continuous hours;
OR
- 16-20 degrees Celsius or above at 56 grm/m3 for 24 continuous hours;
OR
- 11-15 degrees Celsius or above at 64 grm/m3 for 24 continuous hours;
OR
Sulphuryl fluoride at 64 grm/m3 at 21 degree Celsius for 24 continuous hours at NAP or above;
OR
Ethylene oxide under initial minimum vacuum of 50 kilopascals at the following rates:
- 1200 grm/m3 at 50 degree Celsius for 5 continuous hours;
OR
- 1500 grm/m3 for 4 hours at 50 degree Celsius;
OR
- 1500 grm/m3 for 24 continuous hours at 21 degree Celsius;
Phosphine at 5 grm/m3 for 120 hours.
The exporter is to provide evidence attesting to the treatment and present it to the Authorised Officer at the time of inspection.
Details of treatment to be endorsed on the phytosanitary certificate in the treatment section.
Import permit dated 7 April 2022.
05/11/2024 - Endorsement 6955 removed.
19/05/2022 - Created case based on NPPO requirements.