Timber
| Criteria | Criteria Required? |
|---|---|
| Import Permit | No |
| Phytosanitary Certificate | Yes |
| Additional Declaration/Endorsement | Yes |
| Protocol Market | No |
- Anthracnose (Apiognomonia errabunda)
- Ink disease (Phytophthora cambivora)
- Blue stain (Ophiostoma spp)
- Foot rot (Phytophthora spp)
- Damping off (Calonectria spp)
Methyl bromide at:
- 48 grm/m3 for 24 hours at 21 degree Celsius or above
- 56 grm/m3 for 24 hours at 15-20 degree Celsius or above
- 64 grm/m3 for 24 hours at 10-15 degree Celsius or above
Heat Treatment at:
- 70 degree Celsius core temperature maintained for a minimum of four hours (Signed temperature log sheet must be attached with the phytosanitary certificate)
Kiln Drying at:
- Raising core temperature to 74 degree Celsius as follows:
Time, hours 4 6 8 10 14 18 > 18 Thickness, mm 0-15 26-50 51-75 76-100 101-150 150-200 > 200
The Exporter to provide evidence attesting to the treatment and to present to the Authorised Officer at time of inspection.
1) Bark and ambrosia beetle (Trypodendron domesticum), Citrus longhorned beetle (Anoplophora chinensis), Velvet longhorned beetle (Trichoferus campestris), Blue stain (Ophiostoma arduennense), Ceratocystis blight (Ceratocystis fimbriata), Black timber bark beetle (Xylosandrus germanus) are not known to occur in Australia,
2) A representative sample was inspected and found to be free of Anthracnose (Apiognomonia errabunda) and Ink disease (Phytophthora cambivora).
NPPO Notification No 730/9481 dated 7 July 2016.
10/11/2021 - Updated general requirements due to legislation changes.